I-Alumina Ceramic End Effector eneziteshi ze-Vacuum ezihlanganisiwe
I-St.Cera's alumina vacuum end effector ihlanganisa iziteshi ze-vacuum ezisebenza ngomshini oqondile kanye nezimbobo zokumunca ngqo emzimbeni we-alumina ohlanzekile ophezulu ongu-99.8%. Lo mklamo ususa ama-vacuum pad angaphandle, okwenza kube lula ukuthathwa kwe-wafer ngqo ngamandla afanayo okubamba. Amandla aphezulu okugoba (361 MPa) kanye nobunzima (16 GPa) kuqinisekisa ukuzinza kwesikhathi eside ngaphansi kwemijikelezo ye-vacuum ephindaphindwayo. Ukuthamba endaweni ye-pad kugcinwa ngaphakathi kwama-10 μm, okuvimbela ukucindezeleka kwe-wafer kanye nokuphuka. Ama-vacuum port atholakala ku-flange yokufaka yangemuva ukuze kube lula ukuhlanganiswa nezingalo zerobhothi ze-OEM.
Imininingwane(ngokusekelwe ku-99.8% Al₂O₃):
| Impahla | Inani |
| Izinto | I-Alumina engu-99.8% (Ivory) |
| Ubuningi | 3.93 g/cm³ |
| Amandla Okugobeka | 361 MPa |
| Ukuqina kukaVickers | 16 GPa |
| I-Modulus kaYoung | 380 GPa |
| Ukwanda Kokushisa | 7.2×10⁻⁶/℃ |
| Ukuthamba kwephedi | ≤10 μm |
| Ububanzi Besiteshi Sokuhlanza | 0.5–2.0 mm |
| Izinga Lokushisa Eliphezulu Lokusebenza | 800°C |
Izicelo:
● Ukuqoqwa kwe-vacuum kwama-wafer amancane noma agobile
● Ukuphatha i-wafer ngqo ngaphandle kokubamba umphetho
● Ukudluliswa kwe-solar cell kanye ne-LED substrate
Ukukhiqiza:
I-alumina ecwebezelayo engenalutho → Ukubhoboza iziteshi ze-vacuum kanye nemigodi nge-5-axis CNC → ukugoqa okungaphezulu → ukuhlanza nge-ultrasonic → ukuhlolwa kokuvuza kwe-helium. I-effector ngayinye ihlolwe ukugeleza okungu-100% ukuze ithole ukufana kwe-vacuum.
Izinzuzo:
● Awekho ama-vacuum pad angaphandle (kunciphisa imithombo yezinhlayiya)
● Ukucindezela kokubamba okufanayo kuvimbela ukumaka kwe-wafer
● Ukuhambisana namakhemikhali angasebenzi kahle kanye negumbi lokuhlanza
